Icom ID-5100A
Icom ID-5100A receives 118–174MHz and 375–550MHz* with dual receiver capability that allows you to receive two bands simultaneously (including within a single band)*. Almost all VHF & UHF communications are available to you!
*See specifications for receive range coverage.
DV Dualwatch
Icom ID-5100A has simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals. The main band audio has priority, if two DV signals come in at the same time.
GPS receiver
Icom ID-5100A/E has integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver.
Position, course, speed and altitude are shown on the display.
The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites.
The GPS antenna is located in the remote head, no external GPS antenna required.
DV/FM Repeater list function
The DV/FM repeater list function assists you in accessing near-by repeaters, even where you are visiting an area for the first time.
The function searches for near-by repeaters using the repeater memories with the GPS position information.
To use the repeater list function, the position data of the repeater is required in the repeater list.
Icom ID-5100A/E will be shipped with a limited number of repeater memories preprogrammed.
Dplus reflector linking
Dplus Reflector link commands are added to the DR function to allow easy reflector operation.
Use Reflector, link/unlink to Reflector, echo test and repeater information commands are selectable.
Built-in CTCSS/DTCS encoder and decoder
Built-in CTCSS and DTCS tones are used for accessing a closed repeater or tone squelch operation.
The pocket beep alerts you with a beep sound when the transceiver receives a preset tone. 1750Hz tone is also available.
UT-133 Bluetooth® unit (option)
This The UT-133 is the optional Bluetooth® board necessary for operation with the optional VS-3 headset and the optional RS-MS1A, Android™ application.
VS-3 Bluetooth® headset (option)
The optional Bluetooth® headset, VS-3, can be used for hands-free communication and remotely control Icom ID-5100A/E with three programmable buttons.
Providing you with convenient communication in a vehicle.
Connect to Icom ID-5100A/E for remote control of DR functions, link with a map application and send/receive messages and images over the DV mode.
*Optional UT-133 Bluetooth® unit must be installed in Icom ID-5100A.
*Some functions may not work properly, depending on Android™ phones and
devices used.
Other features Icom ID-5100A
- Menu-driven user interface
- DTMF via microphone or ID-5100 display
- Enhanced D-PRS functions with object, position, item and weather formats
- Convenient memory contents management using CSV data format
- Speech function announces operating frequency, mode and received callsign (DV mode)
- Independent main dial, volume and SQL knobs for A/B bands
- AM airband dualwatch
- CS-5100, cloning software supplied
- 50W output power on both VHF and UHF bands
- Weather channel with weather alert function*
- Auto repeater function*
*USA versions only.
Specifications Icom ID-5100A
| Frequency coverage | USA Version | Transmit | 144–148, 430–450*1 |
| Receiver | 118–174, 375–550*1 | ||
| EXP Version | Transmit | 137–174, 400–470*2 | |
| Receiver | 118–174, 375–550*2 | ||
| Type of emission | F2D, F3E, F7W | ||
| Mode | DV, FM, FM-N AM (RX only), AM-N (RX only)* * Depending on version | ||
| Operating temperature range | −10°C to +60°C; +14°F to +140°F | ||
| Frequency stability | ±2.5 ppm (−10°C to +60°C on the basis of 25°C) | ||
| Digital TX speed | 4.8 kbps | ||
| Voice coding speed | 2.4 kbps | ||
| Antenna impedance | 50 Ω (SO-239) | ||
| Number of memory channels | 1000 regular channels, 4 call channels, 50 program scan edges and 1200 repeater memories | ||
| Power supply requirements | 13.8 V DC ±15% | ||
| Current drain | RX Stand-by | 1.2 A | |
| Max. audio | 1.8 A (Dualwatch, with Ext. SP 8Ω load) | ||
| TX | 13.0 A | ||
| Dimensions (W×H×D, projections not included) | Main unit | 150×40×172.6 mm; 5.91×1.57×6.8 in | |
| Controller | 182.2×81.5×24.7 mm; 7.17×3.21×0.97 in | ||
| Weight (approx.) | Main unit | 1.3 kg; 2.87 lb | |
| Controller | 260 g; 9.17 oz | ||
Guaranteed range:
*1 144–148, 440–450 MHz.
*2 144–148, 430–440 MHz
| Output power | 50 W, 15 W, 5 W | |
| Modulation system | FM, FM-N | FM reactance modulation |
| DV | GMSK reactance modulation | |
| Max. frequency deviation | ±5.0 kHz/±2.5 kHz (FM/FM-N) | |
| Spurious emissions | Less than −60 dBc | |
| Microphone impedance | 600 Ω (8-pin modular jack) | |
Receiver
| Intermediate frequencies | A band | 38.85 MHz/450 kHz (1st/2nd) |
| B band | 46.35 MHz/450 kHz (1st/2nd) | |
| Sensitivity | FM/FM-N (12 dB SINAD) | Less than 0.18 μV (amateur bands only) |
| DV (1% BER) | Less than 0.28 μV | |
| Receiver sensitivity (Not guaranteed, for your reference only. Except amateur bands.) | FM/FM-N (12 dB SINAD) | 137–159.995 MHz Less than 0.32 μV |
| 160–174.000 MHz Less than 0.56 μV | ||
| 375–399.995 MHz Less than 0.56 μV | ||
| 400–499.995 MHz Less than 0.32 μV | ||
| 500–550.000 MHz Less than 0.56 μV | ||
| AM (10 dB S/N) | 118–136.9916 MHz Less than 1 μV | |
| Squelch sensitivity | Less than 0.13 μV (at threshold) | |
| Selectivity | FM | More than 60 dB |
| FM-N | More than 55 dB | |
| DV | More than 50 dB | |
| Spurious and image rejections | A band | More than 60/55 dB (VHF/UHF) |
| B band | More than 60/60 dB (VHF/UHF) | |
| Audio output power | More than 2.0 W (with 8Ω load, 10% distortion) | |
| External speaker connector | 2-condcutor 3.5 (d) mm (1/8″)/8Ω | |
All stated specifications are subject to change without notice or obligation.
Ryan Saputra (verified owner) –
Pengiriman di expedisi yang lama, tapi tetap dibantu oleh Rakomindo