Icom IC-G88

Icom IC-G88

Icom IC-G88 dengan standar militer, power 5,5 Watt battery tahan sampai 20 Jam dan Waterproof IP67

• Easy field programming with VFO mode operation
• Up to 16 Favorite channels can be assigned to the rotary knob
• IP67 waterproof and dust-tight protection
• 5.5 W of output power
• Up to 20 hours of operating time with the supplied waterproof battery
• Eight character alphanumeric display
• CTCSS and DTCS encoder/decoder with Pocket beep
• Eight DTMF autodial memories
• MDC 1200 PTT ID and BIIS 1200 PTT ID
• Inversion voice scrambler (16 code) for private conversations
• Channel announcement of the operating channel number
• Seven programmable buttons with Shift key function
• Priority, memory and VFO scan
• Hands-free operation with an optional headset

Spesifikasi Icom IC-G88

General		IC-G88
Frequency coverage		136MHz–174MHz
Type of emissions		16K0F3E, 11K0F3E (25/12.5 kHz)
Number of channels		128 channels
Antenna impedance		50 Ω (BNC)
Power supply requirement		7.5 V DC
Operating temperature range		–30 ˚C to +60 ˚C (Radio only)
Frequency stability		±2.5 ppm
Current drain (Approximate)	Tx High	1.5 A
	Rx Max. audio/Stand-by	500 mA (Internal SP) / 77 mA
Dimensions (W×H×D) (Projections not included)		52.2 × 111.8 × 30.3 mm (with BP-280)
Weight Approximate)		270 g (with BP-280)
Transmitter		IC-G88
Output power (at 7.5 V DC)		5.5/2.0/1.0W (Hi/L2/L1)
Max. frequency deviation		±5.0kHz/±2.5kHz (Wide/Narrow)
Spurious emissions		70 dB minimum
External microphone connector		3-conductor 2.5(d)mm (1/10″)/2.2kΩ
Receiver		IC-G88
Sensitivity		0.25 µV typical (at 12 dB SINAD)
Squelch sensitivity		0.25 µV typical (at threshold)
Adjacent channel selectivity		76 dB/ 53 dB typical (W/N)
Intermodulation		74 dB typical
Spurious response		70 dB minimum
Audio output power	Internal SP	1500 mW typ. (8Ω load)
	External SP	400 mW typ. (8Ω load)
External speaker connector		3-conductor 3.5(d)mm (1/8″)/8Ω

Measurements made in accordance with EIA/TIA-603.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL-810 G
	Method	Proc.
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Rain Blowing/Drip	506.5	I, III
Humidity	507.5	II
Salt Fog	509.5	–
Dust Blowing	510.5	I
Immersion	512.5	I
Vibration	514.6	I
Shock	516.6	I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Dust & Water	IP67 (Dust-tight and waterproof protection)

All stated specifications are subject to change without notice or obligation.