FEATURE :
IDAS™ Multi-site Trunking Radio with Superior Waterproof Protection
IDAS™ digital mode operation
ICOM IC-F4230D series provides NXDN™ CAI-based IDAS digital mode operation. It is compatible with IDAS multi-site and single-site trunking and IDAS multi-site conventional.
IP67 waterproof and dust-tight protection
ICOM IC-F4230D series provides outstanding protection against water and dust equivalent to IP67. ICOM IC-F4230D series can withstand 1m depth of water for 30 minutes and its dust-tight construction prevents the ingress of powder dust, sand, mud and other objects.
Easy to hear in noisy areas
The built-in bridge-tied load (BTL) amplifier delivers a powerful 1000mW* audio output from the large speaker. In addition, the digital modulation provides distinct clarity even at the fringes of the communication range.
* Typical with internal speaker
Channel announcement
When you change the operating channel, the radio announces the channel number. Convenient for making radio adjustments without having to look at the radio.
8-character LCD
An 8-character alphanumeric LCD with user-friendly icons shows a variety of information and operating status such as caller's name, received message, etc.
Roaming scan
In the multi-site trunking mode, if the signal condition worsens as the radio user moves, the roaming scan automatically finds a new site to retain the communication link and quality.
IDAS™ digital mode features
- Up to 500 individual and up to 500 group ID aliases
(Each for single-site/multi-site/conventional)
- PTT ID and ANI
- SDM (Short Data Message)
- Status
- RAN (Radio Access Number)
- Radio check (RX)
- Stun/kill/revive (RX)
- Call alert
- Remote monitor (RX)
- Emergency
- Digital voice scrambler
- ATB (All Trunks Busy) ring back
* TX: Transmit, RX: Receive
Other features
- CTCSS/DTCS encoder/decoder*
- Up to 128 memory channel with 8 zones
- Optional HM-168LWP, waterproof speaker-mic
- Low battery alert
- 2-step power save
- Voting scan
- Time out timer
- Talk around function
- Lone worker function
- Surveillance function
- Forced narrow function*
* Analog mode only
Note: IC-F3230DT/F4230DT is NOT available in some countries. (Not available in the USA.)
Supplied accessories
- Battery pack, BP-232WP
- Belt clip, MB-94R
- Antenna
- Desktop charger, BC-160*
- AC adapter, BC-145SA/SE*
General :
| |
IC-F3230DT/DS
|
IC-F4230DT/DS
|
|---|
| Frequency coverage |
136–174 MHz
|
350–400 MHz
400–470 MHz
450–512 MHz
450–520 MHz
|
|---|
| Number of channels |
128 channels/8 zones
|
|---|
Channel spacing
(Varies according to version) |
25*/12.5/6.25 kHz
|
|---|
| Type of emission |
16K0F3E*/11K0F3E/8K50F3E/4K00F1E/F1D
|
|---|
Current drain
(approx.) | Tx |
1.3A (High)
|
|---|
| Rx |
400mA/100mA (Max. audio/Standby)
|
|---|
Dimensions (W×H×D)
(projections not included |
53×120×37 mm; 2.09× 4.72×1.46 in
(With BP-232WP)
|
|---|
| Weight (approx.) |
340g; 12oz
(With MB-94R, BP-232WP & antenna)
|
|---|
Transmitter
| |
IC-F3230DT/DS
|
IC-F4230DT/DS
|
|---|
RF output power
(at 7.5V DC) |
5W, 2W, 1W
(Hi, L2, L1)
|
4W, 2W, 1W
(Hi, L2, L1)
|
|---|
| Spurious emissions |
75dB typ.
|
|---|
| Frequency stability |
±1.0ppm
|
|---|
| Audio harmonic distortion |
1.0/2.0% typ.
(AF 1kHz 40% deviation, W/N)
|
|---|
| FSK error |
2% typ.
|
|---|
| FM Hum and Noise |
52/46dB typ. (W/N)
|
46/40dB typ. (W/N)
|
|---|
Receiver
| |
IC-F3230DT/DS
|
IC-F4230DT/DS
|
|---|
Sensitivity
(Analog 12dB SINAD)
(Digital 5% BER) |
0.23μV typ.
0.18μV typ.
|
0.24μV typ.
0.18μV typ.
|
|---|
| Adjacent channel selectivity |
77/71/58dB typ. (W/N/D)
|
74/67/58dB typ. (W/N/D)
|
|---|
| Spurious response rejection |
90dB typ.
|
80dB typ.
|
|---|
| Intermodulation rejection |
75/75/70dB typ. (W/N/D)
|
76/76/72dB typ. (W/N/D)
|
|---|
Audio output power
(at 5% distortion, 8Ω load) |
1000mW typ. (Internal SP)
400mW typ. (External SP)
|
|---|
| * |
25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth. |
Note: IC-F3230DT/F4230DT is NOT available in some countries. (Not available in the USA.)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G
Method, Proc. |
|---|
| Low Pressure Storage |
500.5 I
|
|---|
| Low Pressure Operation |
500.5 II
|
|---|
| High Temperature Storage |
501.5 I
|
|---|
| High Temperature Operation |
501.5 II
|
|---|
| Low Temperature Storage |
502.5 I
|
|---|
| Low Temperature Operation |
502.5 II
|
|---|
| Temperature Shock |
503.5 I-C
|
|---|
| Solar Radiation |
505.5 I
|
|---|
| Rain Blowing |
506.5 I
|
|---|
| Rain Drip |
506.5 III
|
|---|
| Humidity Induced |
507.5
|
|---|
| Salt Fog |
509.5
|
|---|
| Dust Blowing |
510.5 I
|
|---|
| Immersion |
512.5 I
|
|---|
| Vibration |
514.6 I
|
|---|
| Shock Functional |
516.6 I
|
|---|
| Shock Transit Drop |
516.6 IV
|
|---|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standards |
|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection)
|
|---|
OPTIONS :
BATTERY PACK
 BP-232WP
(Li-Ion)
7.4V/2250mAh (min.),
2300mAh (typ.)
IP67 |
|
|
|
BATTERY CASES
 BP-240
AAA(LR03)×6 cells |
 BP-261
AA(LR6)×6 cells |
|
|
CHARGERS
 BC-160
Rapid charger |
 BC-171
Regular charger |
 BC-197
Rapid multicharger
(Use with AD-122) |
|
CHARGER ADAPTER
 AD-122
(Use with BC-197 ) |
|
|
|
AC ADAPTERS
 BC-147S*
12V/200mA
(Use with BC-171) |
 BC-157S
12V/7.5A
(Use with BC-197) |
 BC-123S*
12V/1A
(Use with BC-160) |
|
* BC-123/BC-147SA for 120V AC. SE for 230V AC. SV for 240V AC. BC-123SUK for 230V AC.
SPEAKER-MICROPHONES
 HM-158LA
|
 HM-159LA
|
 HM-168LWP
IP67 |
 HM-166LA
|
HEADSETS
 HS-94
Earhook type with boom microphone
(Use with VS-4LA) |
 HS-95
Behind-the-head type
(Use with VS-4LA) |
 HS-97
Throat microphone type
(Use with VS-4LA) |
|
PTT SWITCH CABLE
 VS-4LA
|
|
|
|
BELT CLIPS
 MB-93
Swivel type |
 MB-94R
Alligator type |
|
|
LEATHER BELT HANGERS
 MB-96N
Swivel type. MB-93 swivel joint supplied. |
 MB-96F
Fixed type |
 MB-96FL
Longer type |
|
CIGARETTE LIGHTER CABLE
 CP-23L
(For use with BC-160) |
|
|
|
CHARGER BRACKET
 MB-130
For use with BC-160. |
|
|
|
DC POWER CABLE
 OPC-656
12–20V DC CABLE
(Use with BC-197) |
|
|
|
ANTENNAS
 FA-SC25V
136-150MHz |
 FA-SC55V
150-174MHz |
 FA-SC25U
400-430MHz |
 FA-SC57U
430-470MHz |
 FA-SC72U
470-520MHz |
|
|
|
CUT ANTENNAS
 FA-SC61VC
136-174MHz |
 FA-SC61UC
380-520MHz |
|
|
STUBBY ANTENNAS
 FA-SC56VS
150-162MHz |
 FA-SC57VS
160-174MHz |
 FA-SC73US
450-490MHz |
|
HIGH GAIN ANTENNAS
 FA-SC62V
150-160MHz |
 FA-SC63V
155-165MHz |
|
|
