SPESIFICATION ICOM - IC-U88
- Frequency coverage :
- (Differs according to version ) 335-380MHz
- Dimensions
- (WHD; Proj. not included) 5811230 mm
- Weight
- (approx.) 360g
- with antenna and BP-264
- Output power
- (at 7.2V DC) 4.0W, 2.0W, 0.5W
- (typical values)
- Sensitivity
- (at 12dB SINAD) 0.2V typ.
- Audio output power
- (at 10% distortion) 750mW typ. (Internal SP, 16 load)
- 450mW typ. (External SP, 8 load)
- Handy Talky ICOM IC-U88
- Radio HT Icom IC-U88
- Tough body and powerful audio!
- 750mW* loud and intelligible audio with BTL amplifier and large 36mm speaker * Typical value with internal speaker.
- Powerful 4W of output power
- IP54 and MIL-STD-810 rugged construction
- Large capacity Li-Ion battery pack provides 17.5 hours* of operating time.* Typical operation. 5:5:90 duty cycle with auto power save.
- Integrated VOX function.
- 200 memory channels, 1 call channel and 6 scan edges.
- Built-in CTCSS and DTCS encoder/decoder.
- 5 character alphanumeric display.
- Priority, program, memory, skip and tone scanning.
- 16 DTMF autodial memories
- Repeater lockout and busy channel lockout.
- Time-out-timer.
- Power save function and auto power off.
- PC programmable (With optional CS-U80).
- Transceiver-to-transceiver cloning (Optional).
- Wide/narrow channel spacing.
General
| |
IC-V88
|
IC-U88
|
|---|
| Frequency coverage |
136MHz–174MHz
|
335MHz–380MHz
|
|---|
| Type of emission |
16K0F3E, 11K0F3E (25/12.5kHz)
|
|---|
| Number of channels |
128 channels
|
|---|
| Antenna impedance |
50Ω
|
|---|
| Power supply requirement |
7.5V DC
|
|---|
| Operating temperature range |
−30°C to +60°C (Radio only)
|
|---|
| Frequency stability |
±2.5ppm
|
|---|
Current drain
(approx.) | Tx High |
1.5A |
1.3A |
|---|
| Rx Max. audio/Stand-by |
330mA
(Internal SP) /77mA
|
300mA
(Internal SP)/80mA
|
|---|
Dimensions (W×H×D)
(Projections not included) |
52.2×111.8×22.3 mm (with BP-278)
|
|---|
| Weight |
230g (with BP-278)
|
|---|
Transmitter
| |
IC-V88
|
IC-U88
|
|---|
| Output power (at 7.5V) |
5.5/2.0/0.5W
(Hi/L2/L1)
|
4.0W/2.0W/1.0W
(Hi/L2/L1)
|
|---|
| Max. frequency deviation |
±5.0kHz/±2.5kHz (Wide/Narrow)
|
|---|
| Spurious emissions |
70dB min.
|
|---|
| Ext. microphone connector |
3-conductor 2.5(d)mm (1/10″)/2.2kΩ
|
|---|
Receiver
| |
IC-V88
|
IC-U88
|
|---|
| Sensitivity |
0.25μV typ. (at 12dB SINAD)
|
|---|
| Squelch sensitivity |
0.25μV typ. (at threshold)
|
|---|
| Adjacent channel selectivity |
76dB/53dB typ.
(Wide/Narrow)
|
73dB/56dB typ.
(Wide/Narrow)
|
|---|
| Intermodulation |
74dB typ.
|
73dB typ.
|
|---|
| Spurious response |
70dB min.
|
|---|
| Audio output power | Internal SP |
800mW typ. (12Ω load)
|
|---|
| External SP |
400mW typ. (8Ω load)
|
|---|
| External speaker connector |
3-conductor 3.5(d)mm (1/8″)/8Ω
|
|---|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G
Method, Proc. |
|---|
| Low Pressure Storage |
500.5 I
|
|---|
| Low Pressure Operation |
500.5 II
|
|---|
| High Temperature Storage |
501.5 I
|
|---|
| High Temperature Operation |
501.5 II
|
|---|
| Low Temperature Storage |
502.5 I
|
|---|
| Low Temperature Operation |
502.5 II
|
|---|
| Temperature Shock |
503.5 I-C
|
|---|
| Solar Radiation |
505.5 I
|
|---|
| Rain Blowing |
506.5 I
|
|---|
| Rain Drip |
506.5 III
|
|---|
| Humidity Induced |
507.5 II
|
|---|
| Salt Fog |
509.5
|
|---|
| Dust Blowing |
510.5 I
|
|---|
| Immersion |
512.5 I
|
|---|
| Vibration |
514.6 I
|
|---|
| Shock Functional |
516.6 I
|
|---|
| Shock Transit Drop |
516.6 IV
|
|---|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
| Ingress Protection Standards |
|---|
| Dust & Water |
IP67 (Dust-tight and waterproof protection)
|
|---|
All stated specifications are subject to change without notice or obligation.
