IC-F1100DT

IC-F1100DT

Icom IC-F1100DT is a sleek portable radio that fits nicely in your hand and designed to be the go to entry to mid level digital radio. Three model choices, basic – no display, simple – display with simple keypad, and full – display and fully DTMF keypad, include an array of features such as IDAS digital mode operation in IDAS conventional and multi-site conventional.

 

IDAS™ Features

Icom F1100D series provides NXDN™ CAI-based IDAS digital model operation in IDAS conventional and multi-site conventional. The following IDAS features are available:

  • IDAS™ Type-D single-site trunking
  • Analog/digital conventional mixed mode operation
  • AMBE+2™ vocoder
  • Over-the-Air updates the Alias list (call list) without programming (LCD versions)
  • Individual, group and all call
  • Status all and polling
  • Short data messages (LCD versions)
  • Call alert
  • Radio check (RX only)
  • The call list can save up to 500 ID numbers for IDAS or MDC1200 signaling system to show in the alias name

Safety & Security Features

For emergency situations the F1100D series includes an emergency key and four emergency functions: man down, motion & stationary detection, lone worker, and surveillance function.

The F1100D Series also includes low-level, 16 bit Digital Voice Encryption.

Built-in Analog Signaling

The F1100 series comes all the popular analog signaling including 2-Tone, 5-Tone, CTCSS and DTCS for group communication and selective calling. MDC features include PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), and Revive (RX).

Additional Features

  • Channel announcement
  • Siren sound for security alarm
  • AquaQuake™ to clear water away from the speaker grill
  • DTMF auto dial memories
  • "Shift key" function increase the number of programmable key assignments
  • Three color LED

Channels:

  16 or 128 channels

Output Power:

5W (VHF & 400-470) / 4W (450-512)

Frequencies:

  136-174 MHz
400-470 or 450-512 MHz

Waterproof rating:

  IP67

Programmable Keys:

  3 or 7

Versions:

  No display
Display with simple keypad
Display with full DTMF keypad

General

IC-F1100DT/S

IC-F1100D

IC-F2100DT/S

IC-F2100D

Frequency coverage*
(*Varies according to version)
136–174 MHz (NXDN/dPMR) 350–400 MHz (NXDN, EXP)
400–470 MHz (NXDN/dPMR USA/EUR/EXP)
450–512 MHz (NXDN, USA)
450–520 MHz (NXDN, EXP)
Number of channels

128 channels/ 8 zones

16 channels 128 channels/ 8 zones 16 channels
Type of emission*
(*Depending onversion)

11K0F3E, 4K00F1E, 4K00F1D (USA)

16K0F3E, 14K0F3E, 11K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EXP)

16K0F3E, 14K0F3E, 8K50F3E, 4K00F1E, 4K00F1D (EUR)

Power supply requirement

7.5V DC nominal

Current drain
(approx.)
Tx

1.3A

1.6 A (at 5 W)
1.4 A (at 4 W)

Rx

520 mA /110 mA
(Max. audio (internal SP)/Standby)

520 mA /110 mA
(Max. audio (internal SP)/Standby)

Antenna impedance

50Ω

Operating temperature range
(Radio specification)

–30°C to +60°C; –22°F to +140°F (Radio specification)
(USA/EXP)

–25°C to +55°C (Radio specification)
(EUR)

Dimensions
(W × H × D; Projections not included)

IC-F1100DS/D, IC-F2100DS/D:
52.2 × 111.8 × 29.4 mm; 2.1 × 4.4 × 1.2 in (With BP-280)

IC-F1100DT, IC-F2100DT:
52.2 × 111.8 × 34.1 mm; 2.1 × 4.4 × 1.3 in (With BP-280)

Weight (approx.)

IC-F1100D, IC-F2100D: 258 g, 9.1 oz (With BP-280 and MB-133)
IC-F1100DS, IC-F2100DS: 266 g, 9.4 oz (With BP-280 and MB-133)
IC-F1100DT, IC-F2100DT: 277 g, 9.8 oz (With BP-280 and MB-133)

You can scroll

Transmitter

IC-F1100DT/S

IC-F1100D

IC-F2100DT/S

IC-F2100D

Output power
(Hi, L2, L1)

5 W, 2 W, 1 W

5 W, 2 W, 1 W
(400–470 MHz versions)

4 W, 2 W, 1 W
(All other versions)

Maximum frequency deviation

± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz)

Spurious emissions

70 dB minimum (USA/EXP) (350–400 MHz is included)

0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz)
(EUR/EXP) (Except 350-400 MHz)

Frequency stability

±2.0ppm

±1.0ppm

Audio harmonic distortion

0.8% typ. (25 kHz),
0.9% typical (20 kHz),
1.0% typical (12.5 kHz)
(at AF 1 kHz 40% deviation)

0.7% typ. (25 kHz),
0.9% typical (20 kHz),
1.0% typical (12.5 kHz)
(at AF 1 kHz 40% deviation)

FM Hum and Noise
(without CCITT filter)

46 dB typ. (25 kHz) (EXP),
44 dB typ. (12.5 kHz) (USA/EXP)

44 dB typical (12.5 kHz) (USA)

Residual modulations
(with CCITT filter)

51 dB typical (25 kHz),
49 dB typical (20 kHz),
45 dB typical (12.5 kHz) (EUR/EXP)

54 dB typical (25 kHz),
52 dB typical (20 kHz),
48 dB typical (12.5 kHz) (EUR/EXP)

FSK error

5% maximum

External microphone connector

3-conductor 2.5 (d) mm (1/10 in)/2.2 kΩ

You can scroll

Receiver

IC-F1100DT/S

IC-F1100D

IC-F2100DT/S

IC-F2100D

SensitivityAnalog (at 12dB SINAD)

0.24 μV typical

0.24 μV typical

Analog (at 20dB SINAD)

–5 dBμV typ. emf (25/20 kHz),
–2 dBμV typ. emf (12.5 kHz)

–5 dBμV typ. emf (25/20 kHz),
–2 dBμV typ. emf (12.5 kHz)

Digital (at 5% BER)

–9 dBμV typical emf
(0.18 μV typical)

–8 dBμV typical emf
(0.20 μV typical)

Adjacent channel selectivity

77 dB typ. (25 kHz),
75 dB typ. (20 kHz),
67 dB typ. (12.5 kHz),
59 dB typ. (digital)

76 dB typ. (25 kHz),
75 dB typ. (20 kHz),
69 dB typ. (12.5 kHz),
58 dB typ. (digital)

Spurious response rejection

80 dB typical

Intermodulation rejectionDigital

71 dB typ. (USA/EXP),
74 dBμV emf typ. (EUR/EXP)

70 dB typ. (USA/EXP),
74 dBμV emf typ. (400–470 MHz, EUR/EXP),
71 dBμV emf typ. (350–400 MHz, EXP)

Analog

76 dB typ. (25 kHz, EXP),
75 dB typ. (12.5 kHz, USA/EXP),
69 dB typ. (EUR/EXP)

77 dB typ. (25 kHz, EXP),
77 dB typ. (12.5 kHz, USA/EXP),
70 dB typ. (EUR/EXP)

Hum and noise(With CCITT filter)

48 dB typ. (25 kHz, EXP),
43 dB typ. (12.5 kHz, USA/EXP)

42 dB typical (12.5 kHz, USA)

(Without CCITT filter)

51 dB typ. (25 kHz),
49 dB typ. (20 kHz),
46 dB typ. (12.5 kHz)
(EUR/EXP)

50 dB typ. (25 kHz),
48 dB typ. (20 kHz),
45 dB typ. (12.5 kHz)
(EUR)

AF output power
(at 5% distortion)
Internal SP

1500 mW typical (With an 8Ω load)

External SP

450 mW typical
(With an 8Ω load)

400 mW typical
(With an 8Ω load)

External speaker connector

2-conductor 3.5 (d) mm (1⁄8 in)/8 Ω

All stated specifi cations are subject to change without notice or obligation.
Measurements made in accordance with TIA-603 (USA/EXP) or EN 300-086 (EUR).

You can scroll

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard

MIL-810 G

Method

Procedure

Low Pressure

500.5

I, II

High Temperature

501.5

I, II

Low Temperature

502.5

I, II

Temperature Shock

503.5

I-C

Solar Radiation

505.5

I

Rain Blowing/Drip

506.5

I, III

Humidity

507.5

II

Salt Fog

509.5

Dust Blowing

510.5

I

Immersion

512.5

I

Vibration

514.6

I

Shock

516.6

I, IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
 

Ingress Protection Standard
Dust & Water

IP67 (Dust-tight and Immersion)
IP55/IP54 (Dust and Water jets/Water resistant)



All stated specifications are subject to change without notice or obligation.

You can scroll

Supplied Accessories

  • Battery pack, BP-280
  • Belt clip, MB-133
  • Antenna
  • Desktop charger, BC-213*
  • AC adapter*, BC-242 (or BC-123SE/SUK/SV)

* May differ, or not supplied, depending on the version.

Dealer resmi Icom di Indonesia kami menyediakan produk asli Icom harga ht, radio rig dan repeater merk icom, dengan garansi 1 tahun  kami memberikan harga terbaik untuk pembelian dalam jumlah banyak. Kami juga menyediakan aksesoris original icom seperti antena handy talky, baterai ht, charger baterai dan juga aksesoris antena lainnya.

Untuk mendapatkan penawaran harga silahkan hubungi sales kami di:

Email : [email protected]
Telp : (021) 4211456 - 4211477
WA : 0812 8191 7839
WA : 0811 1477 192
WA : 0811 1477 195
WA : 0811 9048 889
No reviews

10 produk lainnya dikategori yang sama:

Product added to wishlist
Product added to compare.

WA Kami