IC-7600

DISCONTINUED

The latest DSP technologies developed for the IC-7800/7700 plus over 45 years of analog circuit expertise give the IC-7600 the performance advantage. The flagship's lineage: dual DSP units, 3kHz 1st (roofing) filter, double-conversion superheterodyne, all direct descendents of the IC-7800/7700.

icom
HF

Keterangan
Detail produk

Push Performance to the Pinnacle

Dual DSP: Separate DSP units for transmitter/receiver and spectrum scope.
Ist IF Filter: Three built-in 1st IF (roofing) filters – 3, 6 and 15 kHz.
Receiver System: The double-conversion superheterodyne system and the image rejection mixer improve inband IMD.
Display: 5.8-inch WQVGA (400×240 pixels)ultra-wide viewing angle TFT display with long-life LED backlighting.
Spectrum Scope: High-resolution real-time spectrum scope using a dedicated DSP unit.
USB Connectors: Easily connect keyboards, flash memory drives and PCs.
Download the USB driver now!
PSK Operation: Built-in PSK and RTTY operation with a USB keyboard - PC not required.
Compare the IC-7600 to the IC-756PROIII, IC-7700 and IC-7800!

Dual DSP for transmitter/receiver and spectrum scope

Two separate 32-bit DSP units power the transmitter/receiver and spectrum scope. These processors give the IC-7600 high performance comparable to our top-of-the-line IC-7800 and IC-7700, thanks to the combination of dual DSP and our analog RF design expertise.

General

Frequency coverage^*1
U.S.A. Version
Rx
Tx

Europe, UK Version
Rx
Tx

0.030– 60.000 MHz^*2
1.800– 1.999 MHz 3.500– 3.999 MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz^*3
7.000– 7.300 MHz 10.100–10.150 MHz
14.000– 14.350 MHz 18.068–18.168 MHz
21.000– 21.450 MHz 24.890–24.990 MHz
28.000– 29.700 MHz 50.000–54.000 MHz

0.030– 60.000 MHz^*2
1.810– 1.999 MHz 3.500– 3.800 MHz
7.000– 7.100 MHz (Europe version)
7.000– 7.200 MHz (UK version)
10.100– 10.150 MHz 14.000–14.350 MHz
18.068– 18.168 MHz 21.000–21.450 MHz
24.890– 24.990 MHz 28.000–29.700 MHz
50.000– 52.000 MHz
*1 Frequency ranges vary depending on version.
*2 Some frequency ranges are not guaranteed.
*3 Carrier point frequency. USB mode only.

Mode

USB, LSB, CW, RTTY, PSK31, AM, FM

Number of channels

101 (99 regular, 2 scan edges)

Antenna impedance

50Ω unbalanced (Tuner off)

Antenna connector

SO-239×2 and RCA×1

Power supply requirement

13.8V DC ±15%

Temperature range

0°C to +50°C; +32°F to +122°F

Frequency stability

Less than ±0.05ppm
(0°C to +50°C, after warm up)

Frequency resolution

1Hz (minimum)

Power consumption
Tx Max. power

Tx	Max. power	23A
Rx	Stand-by	3.0A (typ.)
	Max. audio	3.5A (typ.)

Dimensions (W×H×D)
(projections not included)

340 × 116 × 279.3 mm;
13³⁄₈ × 4⁹⁄₁₆ × 11in

Weight (approx.)

10kg; 22.0lb (approx.)

Transmitter
Output power SSB, CW, RTTY, PSK31, FM AM	(continuously adjustable) 2–100W 1–30W
Modulation system SSB AM FM	PSN modulation Digital low power modulation Digital phase modulation
Spurious emission Harmonics	Less than -50dB (HF bands) Less than -63dB (50 MHz band)
Carrier suppression	More than 63dB
Unwanted sideband suppression	More than 80dB
TX variable range	±9.999 kHz
Microphone impedance	600Ω (8-pin connector)

Receiver
Receive system	Double conversion super-heterodyne system
Intermediate frequencies 1st 2nd	64.455 MHz 36 kHz
Sensitivity (typical) SSB, CW, RTTY (BW: 2.4kHz at 10dB S/N) AM (BW: 6kHz at 10dB S/N) FM (BW: 15kHz at 12dB SINAD)	1.8–29.999 MHz 0.15μV (Pre-amp 1 ON) 50.0–54.0 MHz 0.12μV (Pre-amp 2 ON) 1.8–29.999 MHz 1.6μV (Pre-amp 1 ON) 50.0–54.0 MHz 1μV (Pre-amp 2 ON) 28–29.990 MHz 0.5μV (Pre-amp 1 ON) 50.0–54.0 MHz 0.32μV (Pre-amp 2 ON)
Squelch sensitivity (Pre-amp: OFF) SSB, CW, RTTY, PSK31 FM	Less than 3.2μV Less than 0.3μV
Selectivity (representative value) SSB(BW: 2.4kHz) RTTY (BW: 350Hz) CW (BW: 500Hz) AM (BW: 6kHz) FM (BW: 15kHz)	More than 2.4 kHz/–6dB Less than 3.8 kHz/–60dB More than 350 Hz/–6dB Less than 650 Hz/–6dB More than 500 kHz/–6dB Less than 900 kHz/–60dB More than 6.0 kHz/–6dB Less than 15.0 kHz/–60dB More than 12.0 kHz/–6dB Less than 20.0 kHz/–60dB
Spurious and image rejection ratio	More than 70dB (except 50 MHz IF through point)
Audio output power	More than 2.0W at 10% distortion with an 8Ω load
RIT variable range	±9.999 kHz
PHONES connector	3-conductor 6.35 (d) mm (¹⁄₄″)
EXT SP connector	2-conductor 3.5 (d) mm (¹⁄₈″) /8Ω

Antenna Tuner
Matching range HF band 50 MHz bands	16.7Ω to 150Ω unbalanced 20Ω to 125Ω unbalanced

The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction or defect, but a normal characteristic of LCD displays.

All stated specifications are subject to change without notice or obligation.

IC-7600 https://radiokomunikasi.com/1050-large/ic-7600.jpg <h2>Push Performance to the Pinnacle</h2> The latest DSP technologies developed for the IC-7800/7700 plus over 45 years of analog circuit expertise give the IC-7600 the performance advantage. The flagship's lineage: dual DSP units, 3kHz 1st (roofing) filter, double-conversion superheterodyne, all direct descendents of the IC-7800/7700. <ul class="Features"><li>Dual DSP: Separate DSP units for transmitter/receiver and spectrum scope.</li> <li>Ist IF Filter: Three built-in 1st IF (roofing) filters – 3, 6 and 15 kHz.</li> <li>Receiver System: The double-conversion superheterodyne system and the image rejection mixer improve inband IMD.</li> <li>Display: 5.8-inch WQVGA (400×240 pixels)ultra-wide viewing angle TFT display with long-life LED backlighting.</li> <li>Spectrum Scope: High-resolution real-time spectrum scope using a dedicated DSP unit.</li> <li>USB Connectors: Easily connect keyboards, flash memory drives and PCs. <a href="http://www.icom.co.jp/world/support/download/firm/IC-7600/1_00/index.html">Download the USB driver now! </a></li> <li>PSK Operation: Built-in PSK and RTTY operation with a USB keyboard - PC not required.</li> <li><a href="http://www.icomamerica.com/en/products/amateur/hf/7600/7600Comparison.pdf">Compare the IC-7600 to the IC-756PROIII, IC-7700 and IC-7800!</a> <img src="http://www.icomamerica.com/en/products/amateur/images/pdf_mk.gif" alt="" width="26" height="13" /></li> </ul><h4><img src="http://www.icomamerica.com/en/products/amateur/hf/7600/DSPreceiver.jpg" alt="DSP Reciver" width="300" height="195" />Dual DSP for transmitter/receiver and spectrum scope</h4> Two separate 32-bit DSP units power the transmitter/receiver and spectrum scope. These processors give the IC-7600 high performance comparable to our top-of-the-line IC-7800 and IC-7700, thanks to the combination of dual DSP and our analog RF design expertise. <table class="Specs"><tbody><tr><th colspan="2">General</th></tr><tr><td>Frequency coverage*1 U.S.A. Version Rx Tx Europe, UK Version Rx Tx</td> <td> 0.030– 60.000 MHz*2 1.800– 1.999 MHz 3.500– 3.999 MHz 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz*3 7.000– 7.300 MHz 10.100–10.150 MHz 14.000– 14.350 MHz 18.068–18.168 MHz 21.000– 21.450 MHz 24.890–24.990 MHz 28.000– 29.700 MHz 50.000–54.000 MHz 0.030– 60.000 MHz*2 1.810– 1.999 MHz 3.500– 3.800 MHz 7.000– 7.100 MHz (Europe version) 7.000– 7.200 MHz (UK version) 10.100– 10.150 MHz 14.000–14.350 MHz 18.068– 18.168 MHz 21.000–21.450 MHz 24.890– 24.990 MHz 28.000–29.700 MHz 50.000– 52.000 MHz *1 Frequency ranges vary depending on version. *2 Some frequency ranges are not guaranteed. *3 Carrier point frequency. USB mode only.</td> </tr><tr><td>Mode</td> <td>USB, LSB, CW, RTTY, PSK31, AM, FM</td> </tr><tr><td>Number of channels</td> <td>101 (99 regular, 2 scan edges)</td> </tr><tr><td>Antenna impedance</td> <td>50Ω unbalanced (Tuner off)</td> </tr><tr><td>Antenna connector</td> <td>SO-239×2 and RCA×1</td> </tr><tr><td>Power supply requirement</td> <td>13.8V DC ±15%</td> </tr><tr><td>Temperature range</td> <td>0°C to +50°C; +32°F to +122°F</td> </tr><tr><td>Frequency stability</td> <td>Less than ±0.05ppm (0°C to +50°C, after warm up)</td> </tr><tr><td>Frequency resolution</td> <td>1Hz (minimum)</td> </tr><tr><td>Power consumption Tx Max. power</td> <td> <table class="Subtable" border="0" width="100%" cellspacing="0" cellpadding="0"><tbody><tr><td width="7%">Tx</td> <td width="18%">Max. power</td> <td>23A</td> </tr><tr><td>Rx</td> <td>Stand-by</td> <td>3.0A (typ.)</td> </tr><tr><td> </td> <td>Max. audio</td> <td>3.5A (typ.)</td> </tr></tbody></table></td> </tr><tr><td>Dimensions (W×H×D) (projections not included)</td> <td>340 × 116 × 279.3 mm; 133⁄8 × 49⁄16 × 11in</td> </tr><tr><td>Weight (approx.)</td> <td>10kg; 22.0lb (approx.)</td> </tr></tbody></table><table class="Specs"><colgroup><col class="Specification" /><col class="Measurement" /></colgroup><tbody><tr><th colspan="2">Transmitter</th></tr><tr><td width="200">Output power SSB, CW, RTTY, PSK31, FM AM</td> <td>(continuously adjustable) 2–100W 1–30W</td> </tr><tr><td>Modulation system SSB AM FM</td> <td> PSN modulation Digital low power modulation Digital phase modulation</td> </tr><tr><td valign="top">Spurious emission Harmonics</td> <td> Less than -50dB (HF bands) Less than -63dB (50 MHz band)</td> </tr><tr><td>Carrier suppression</td> <td>More than 63dB</td> </tr><tr><td>Unwanted sideband suppression</td> <td>More than 80dB</td> </tr><tr><td><img src="http://www.icomamerica.com/en/products/images/delta.gif" alt="Delta TX variable range" />TX variable range</td> <td>±9.999 kHz</td> </tr><tr><td>Microphone impedance</td> <td>600Ω (8-pin connector)</td> </tr></tbody></table><table class="Specs"><colgroup><col class="Specification" /><col class="Measurement" /></colgroup><tbody><tr><th colspan="2">Receiver</th></tr><tr><td>Receive system</td> <td>Double conversion super-heterodyne system</td> </tr><tr><td>Intermediate frequencies 1st 2nd</td> <td> 64.455 MHz 36 kHz</td> </tr><tr><td>Sensitivity (typical) SSB, CW, RTTY (BW: 2.4kHz at 10dB S/N) AM (BW: 6kHz at 10dB S/N) FM (BW: 15kHz at 12dB SINAD)</td> <td> 1.8–29.999 MHz 0.15μV (Pre-amp 1 ON) 50.0–54.0 MHz 0.12μV (Pre-amp 2 ON) 1.8–29.999 MHz 1.6μV (Pre-amp 1 ON) 50.0–54.0 MHz 1μV (Pre-amp 2 ON) 28–29.990 MHz 0.5μV (Pre-amp 1 ON) 50.0–54.0 MHz 0.32μV (Pre-amp 2 ON)</td> </tr><tr><td>Squelch sensitivity (Pre-amp: OFF) SSB, CW, RTTY, PSK31 FM</td> <td> Less than 3.2μV Less than 0.3μV</td> </tr><tr><td>Selectivity (representative value) SSB(BW: 2.4kHz) RTTY (BW: 350Hz) CW (BW: 500Hz) AM (BW: 6kHz) FM (BW: 15kHz)</td> <td> More than 2.4 kHz/–6dB Less than 3.8 kHz/–60dB More than 350 Hz/–6dB Less than 650 Hz/–6dB More than 500 kHz/–6dB Less than 900 kHz/–60dB More than 6.0 kHz/–6dB Less than 15.0 kHz/–60dB More than 12.0 kHz/–6dB Less than 20.0 kHz/–60dB</td> </tr><tr><td>Spurious and image rejection ratio</td> <td>More than 70dB (except 50 MHz IF through point)</td> </tr><tr><td>Audio output power</td> <td>More than 2.0W at 10% distortion with an 8Ω load</td> </tr><tr><td>RIT variable range</td> <td>±9.999 kHz</td> </tr><tr><td>PHONES connector</td> <td>3-conductor 6.35 (d) mm (1⁄4″)</td> </tr><tr><td>EXT SP connector</td> <td>2-conductor 3.5 (d) mm (1⁄8″) /8Ω</td> </tr></tbody></table><table class="Specs"><colgroup><col class="Specification" /><col class="Measurement" /></colgroup><tbody><tr><th colspan="2">Antenna Tuner</th></tr><tr><td>Matching range HF band 50 MHz bands</td> <td>16.7Ω to 150Ω unbalanced 20Ω to 125Ω unbalanced</td> </tr></tbody></table>The LCD display may have cosmetic imperfections that appear as small or dark spots. This is not a malfunction or defect, but a normal characteristic of LCD displays. All stated specifications are subject to change without notice or obligation. discontinued 0 IDR in_stock

IC-7600

DISCONTINUED

Push Performance to the Pinnacle

Dual DSP for transmitter/receiver and spectrum scope

Home