HYTERA RD628

HYTERA
RD628

Baru

Digital Repeater Hytera RD628 support IP address power output 25 Watt bekerja pada frekwensi VHF atau UHF

Detail

Harga:
(021) 4211477
081281917839

Informasi selengkapnya

Fitur Digital Repeater Hytera RD628

Multiple Sites via IP

DIGITAL REPEATER HYTERA RD628 supports network connection via the IP port of repeater to form a private radio network to meet data and voice communication needs for wide-area coverage and dispersed locations.

Digital Audio Streaming of Dual Time Slots

DIGITAL REPEATER HYTERA RD628 supports the streaming of both the voice slots via the rear port accessory pins, allowing for capability expansion via future development.

Analog/Digital Operating Mode

DIGITAL REPEATER HYTERA RD628 supports operating mode in both Analog and Digital.

Analog Scan

The DIGITAL REPEATER HYTERA RD628 supports Analog voice and signaling scan, allowing coverage of different analog voice users from various groups.

Repeater Diagnostic And Control (RDAC)

DIGITAL REPEATER HYTERA RD628 supports Remote IP connection to monitor, diagnose and control the repeater, thus increasing maintenance efficiency. The Hytera developed RDAC is able to support multiple master network connections to allow the radio administrator to monitor multiple radio networks.

AC/DC Auto Switch

DIGITAL REPEATER HYTERA RD628 integrates an internal power supply that supports a battery floating charge. The power supports 13.6V±15% DC and 90V-264V AC. If the AC power is cut off, the DC power (battery) automatically takes over without interruption.

Analog/Digital Back-to-Back Interconnect

DIGITAL REPEATER HYTERA RD628 supports different operating modes of Analog and Digital to interconnect for voice cross patch, allowing Analog users to communicate to Digital users and vice versa. This allows for a smooth migration for Analog users to the digital world!

Multi CTCSS/CDCSS Decode

DIGITAL REPEATER HYTERA RD628 supports decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels, allowing coverage for different Analog voice users from various groups.

Analog/Digital Telephone Interconnect

DIGITAL REPEATER HYTERA RD628 supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial off the Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).

Analog/Digital Auto Switch

DIGITAL REPEATER HYTERA RD628 supports Analog and Digital channel auto switching, allowing for efficient frequency sharing between Analog and Digital users and an easy digital migration.

All-In-One Compact Design

DIGITAL REPEATER HYTERA RD628's compact design, integrates RF, Power supply, and duplexer into one box, which makes DIGITAL REPEATER HYTERA RD628 smaller, lighter, and easier for wall-mount installation and indoor coverage.

Repeater Access Management

DIGITAL REPEATER HYTERA RD628 supports a repeater access control feature allowing better security to prevent unauthorized users from accessing the radio network.

Specifications Digital Repeater Hytera RD62

General
Frequency
136-174MHz, 400-470MHz
Channel Capacity
16
Channel Spacing
12.5kHz/20kHz/25kHz
Operating Voltage
13.6±15%V DC
100V-240V AC
Current Drain
Standby
≤0.5A
Transmit
≤5.5A
Frequency Stability
±0.5ppm
Antenna Impedance
50Ω
Duty Cycle
100%
Dimensions (H×W×D)
210x348x108mm
Weight
5 kg
Transmitter
RF Power Output
1-25W Continuous
FM Modulation
11K0F3E@12.5kHz
14K0F3E@20kHz
16K0F3E@25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD
12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission
-36dBm <1GHz
-30dBm >1GHz
Modulation Limiting
±2.5 kHz @ 12.5 kHz
±4.0 kHz @ 20 kHz
±5.0 kHz @ 25 kHz
FM Hum & Noise
40dB @ 12.5 kHz
43dB @ 20 kHz
45dB @ 25 kHz
Adjacent Channel Power
60dB@12.5kHz
70dB@20 /25kHz
Audio Response
+1 ~ -3dB
Audio Distortion
≤3%
Digital Vocoder Type
AMBE++ or SELP
Digital Protocol
ETSI-TS102 361-1,-2,-3
Receiver
Sensitivity
Analog
0.3μV (12dB SINAD)
0.22μV (Typical) (12dB SINAD)
0.4μV (20dB SINAD)
Digital
0.3uV/BER5%
Adjacent Channel Selectivity
TIA-603: 65dB @ 12.5 kHz ;75dB @ 20/25 kHz
ETSI: 60dB @ 12.5 kHz ;75dB @ 20/25 kHz
Intermodulation
TIA-603:75dB @ 12.5/20/25 kHz
ETSI:70dB @ 12.5/20/25 kHz
Spurious Response Rejection
TIA-603:75dB @ 12.5/20/25 kHz
ETSI:70dB @ 12.5/20/25 kHz
Blocking
TIA-603:90dB
ETSI: 84dB
Hum and Noise
40dB @ 12.5KHz
43dB @ 20KHz
45dB @ 25KHz
Rated Audio Distortion
≤3%
Audio Response
+1 ~ -3dB
Conducted Spurious Emission
<-57dBm
Environmental Specifications
Operating Temperature
-30?~+60?
Storage Temperature
-40?~+85?

Comments ()

10 other products in the same category: