ID-5100A Perbesar

Icom ID-5100A

Icom
ID-5100A

Baru

The ID-5100A receives 118–174MHz and 375–550MHz* with dual receiver capability that allows you to receive two bands simultaneously (including within a single band)*. Almost all VHF & UHF communications are available to you!

Detail

Harga:
(021) 4211477
081281917839

Informasi selengkapnya

General

Frequency coverage

USA

 

 

TX
RX
144–148MHz, 430–450MHz
118–174MHz, 375–550MHz
Type of emission F2D, F3E, F7W
Mode FM, FM-N, DV, AM (receive only) depending on version
No. of memory channels 1,000 regular channels, 4 call channels, 50 program scan edges and 1200 repeater memories
Operating temperature range –10˚C to +60˚C; +14˚F to +140˚F
Frequency stability ±2.5ppm (–10˚C to +60˚C on the basis of 25˚C)
Digital transmission speed 4.8kbps
Voice coding speed 2.4kbps
Power supply requirement 13.8V DC ±15%

Current drain (at 13.8V DC)

Transmit

Receive

 

Max power 13.0A
Stand-by 1.2A
Max. audio 1.8A
Antenna impedance 50Ω (SO-239)

Dimensions (W × H × D)

Main unit

Controller

 

150×40×172.6 mm; 5.91×1.57×6.8 in

182.2×81.5×24.7 mm; 7.17×3.21×0.97 in

Weight

Main unit

Controller

1300g; 2.87 lb

260g; 9.17 oz

Transmitter

Output power

High/Mid/Low

 

50W, 15W*, 5W* selectable
*25W for Taiwan version.

Max. frequency deviation ±5.0kHz / ±2.5kHz (wide/narrow)
Spurious emissions Less than –60dB
Microphone impedance 600Ω (8-pin modular jack)
Receiver
Intermediate frequencies

A band

B band

 

38.85MHz/450kHz (1st/2nd)

46.35MHz/450kHz (1st/2nd)

Sensitivity

FM (12dB SINAD)

DV (1% BER )

 

Less than 0.18μV

Less than 0.28μV

Squelch sensitivity

Less than 0.13μV at threshold

Selectivity

FM Wide

FM Narrow

DV

 

More than 60dB

More than 55dB

More than 50dB

Spurious and image rejection

A band VHF/UHF

B band VHF/UHF

 

More than 60/55dB

More than 60/60dB

Audio output (at 13.8V DC)

More than 2.0W

at 10% distortion with an 8Ω load

Ext. speaker connectors 2-conductor 3.5 (d) mm (1⁄8")/8Ω
Receiver sensitivity
FM/FM Narrow (12dB SINAD)

137–159.995MHz

160–174.000MHz

375–399.995MHz

400–499.995MHz

500–550.000MHz

AM (10dB S/N

118–136.996166MHz Less than 1μV

(* Except amateur bands)

 

 

Less than 0.32μV

Less than 0.56μV

Less than 0.56μV

Less than 0.32μV

Less than 0.32μV

 

Less than 0.56μV

 

All stated specifications are subject to change without notice or obligation. 

FEATURES

Intuitive touch screen operation

Qwerty keyboardThe intuitive touch screen interface provides quick and smooth operation for setting and editing various functions and memories. The 5.5 inch display (320 × 128 pixel) shows a large easy-to-see software keypad (Qwerty keyboard), and allows you to input alphanumeric characters quickly.

V/U, V/V, U/U Dual receive

The ID-5100A receives 118–174MHz and 375–550MHz* with dual receiver capability that allows you to receive two bands simultaneously (including within a single band)*. Almost all VHF & UHF communications are available to you!
*See specifications for receive range coverage.

DV Dualwatch

The ID-5100A has simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals. The main band audio has priority, if two DV signals come in at the same time.

FM/DV Dualwatch
DV/DV Dualwatch (DR function)
FM/DV Dualwatch (DR function)

GPS receiver

Received position information exampleThe ID-5100A/E has integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver. Position, course, speed and altitude are shown on the display. The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites. The GPS antenna is located in the remote head, no external GPS antenna required.

DV/FM Repeater list function

The DV/FM repeater list function assists you in accessing near-by repeaters, even where you are visiting an area for the first time. The function searches for near-by repeaters using the repeater memories with the GPS position information.
To use the repeater list function, the position data of the repeater is required in the repeater list. The ID-5100A/E will be shipped with a limited number of repeater memories preprogrammed.

Dplus reflector linking

Dplus Reflector link commands are added to the DR function to allow easy reflector operation. Use Reflector, link/unlink to Reflector, echo test and repeater information commands are selectable.

Built-in CTCSS/DTCS encoder and decoder

Reflector commandsBuilt-in CTCSS and DTCS tones are used for accessing a closed repeater or tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone. 1750Hz tone is also available.

UT-133 Bluetooth® unit (option)

UT-133This The UT-133 is the optional Bluetooth® board necessary for operation with the optional VS-3 headset and the optional RS-MS1A, Android™ application.

VS-3 Bluetooth® headset (option)

The optional Bluetooth® headset, VS-3, can be used for hands-free communication and remotely control the ID-5100A/E with three programmable buttons. Providing you with convenient communication in a vehicle.



RS-MS1A Android™ application (optional free download from Google Play™)

RS-mS1A Android ApplicationConnect to the ID-5100A/E for remote control of DR functions, link with a map application and send/receive messages and images over the DV mode.

Download now >

*Optional UT-133 Bluetooth® unit must be installed in the ID-5100A.
*Some functions may not work properly, depending on Android™ phones and 
devices used. 

Steps to send a picture over DV mode

Steps to send a pictur over DV mode


Data transfer speed

Other features

    • Menu-driven user interface
    • DTMF via microphone or ID-5100 display
    • Enhanced D-PRS functions with object, position, item and weather formats
    • Convenient memory contents management using CSV data format
    • Speech function announces operating frequency, mode and received callsign (DV mode)
    • Independent main dial, volume and SQL knobs for A/B bands
    • AM airband dualwatch
    • CS-5100, cloning software supplied
    • 50W output power on both VHF and UHF bands
    • Weather channel with weather alert function*
    • Auto repeater function*
      *USA versions only.

Supplied accessories

  • Menu-driven user interface
  • Hand microphone, HM-207
  • Controller cable, OPC-837 (3.5 m; 11.4 ft)
  • Microphone hanger
  • CD (CS-5100 and instruction handbook PDF)
  • Spare fuse
  • MBA2*
  • Remote head bracket*
  • Magnets*
    *Deluxe version only.

 

Front and rear panel views

Comments ()

30 other products in the same category: