Produk yang pernah dilihat
The IP100H IP communication terminal...
The IP100H IP communication terminal transmits voice and preprogrammed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN).
Perhatian: produk terakhir
* Requires either HM-153LS, HM-166LS, HS-102 with OPC-2359 or HS-85 with OPC-2144 for
The IP100H IP communication terminal transmits voice and preprogrammed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN). The controller redirects traffic to the specified terminals. The IP100FS remote communicator can create a virtual radio and simple dispatch station on a Windows® based PC. The IP100FS can obtain position information (based on using access points) and status information of each terminal.
With an optional earphone-microphone (HM-153LS, or HM-166LS) or headset (HS-102 with OPC-2359 or HS-85 with OPC-2144), the IP100H can talk and receive at the same time. All users in the system can communicate simultaneously.
The IP100H/IP100FS can make Individual calls, Group conference calls, All calls and Area calls. The unique Area call function allows you to call any user who is accessing the specified access point.
The mixing function receives multiple user's voices at the same time. One-to-many communication is possible and the efficiency of information sharing increases.
If two or more wireless access points are deployed over an IP network, the IP100H can access the nearest access point and can roam between access points.
The IP100H/IP100FS can send status and short data messages* to other users.
* The IP100H can send only preprogrammed messages.
Deploying wireless access points over an IP network can expand the communication range. Dispersed sites can also be connected over an IP network (VPN). Range is only restricted by your IP network coverage.
The wireless LAN security protocols (WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)) encrypt your private conversations.
Licensing and applications are not required for installation. IEEE 802.11 a/b/g/n standards are used.
The IP1000C programs almost all terminal configurations over the air. Individual PC programming via cable connection is not required.
With a VE-PG3 RoIP gateway, the IP advanced radio system can interconnect with an IP phone, IDAS™ NXDN™ *1, IDAS™ dPMR™ Mode 2 digital and analogue transceivers.
When used with an IP phone system, the IP100H can be used as a phone handset for making internal or external calls.*2
|*1||NXDN™ Type-D multi-site trunking and conventional system using the IC-FR5000/FR5200H series.|
|*2||For interconnection with other equipment, verification tests are required before the installation. The IP100H can call a preprogrammed phone number only. (Cannot manually enter phone numbers to make a call.)|
The IP communication terminals, radios and telephones can communicate with each other within the doughnut shaped blue ring.