New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio.
The Innovative HF Transceiver
Download the latest firmware updates
New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio. The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the ‘7300 will far exceed your expectations for a radio considered entry level.
|100W (25W AM)|
RF direct sampling system
The IC-7300 employs an RF direct sampling system, where RF signals are directly convert to digital data. Then processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction as well as reduce noise that can mask weak signals.
The new “IP+” improves the 3rd order intercept point (IP3) performance improving the ability to copy a weak signal that is adjacent to either a strong interfering signal. In this process, A/D converter is optimized to reduce or eliminate signal distortion.
RMDR and phase noise characteristics
The IC-7300’s RMDR is about 97dB* (typical value) improving the Phase Noise characteristics by about 15dB (at 1 kHz frequency separation). The superior Phase Noise characteristics reduce noise components for both receive and transmit signals.
* At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)
15 discrete band-pass filters
The RF Direct Sampling is protected by an array of bandpass filters. The signal passes through one of the fifteen bandpass filters, where signals outside the passband are rejected. To reduce the insertion loss, the IC-7300 utilizes High Q factor coils.
Large color touch screen
The large 4.3” color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as the band scope, waterfall function, and audio scope.
Like on the high-end rigs, the waterfall shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.
Use the audio scope function to observe various AF TX/RX characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Image below shows the Audio scope with the waterfall function and the oscilloscope.
Touch screen display
Audio scope function
Real-Time spectrum scope
You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300’s real-time spectrum scope offers the simultaneous operations found in some of the more expensive rigs! This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The ‘7300’s touch screen introduces a “Magnify” function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.
Spectrum scope specifications
|Scope system||FFT (Fast Fourier Transform)|
|Sweep speed||Max. 30 frames/second (approx.), selectable from slow, mid or fast|
|Resolution||1 pixel minimum (approximately)|
|Waveform display area (vertical axis)||80dB|
|Reference level adjustment||–20dB to +20dB|
|Peak level hold function (Max. hold)||ON/OFF/last 10 seconds|
|Other functions||Averaging indication
Touch screen operation
VBW (Video Band Width) adjustment
- Built-in automatic antenna tuner
- 101 channels (99 regular, 2 scan edges)
- SD memory card slot for saving data
- Cooling fan system
- Multi-function meter
- CW functions: full break-in, CW reverse, CW auto tuning
- SSB, CW, RTTY, AM, FM modes
1.800–1.999, 3.500–3.999, 5.255–5.405*, 7.000–7.300, 10.100–10.150, 14.000–14.350, 18.068–18.168, 21.000–21.450, 24.890–24.990, 28.000–29.700, 50.000–54.000
* Some frequency bands are not guaranteed.
** Guaranteed range: 0.500–29.999, 50.000–54.000MHz.
|Mode||SSB, CW, RTTY, AM, FM|
|Number of channels||101 (99 regular, 2 scan edges)|
|Antenna connector||SO-239 (50Ω)|
|Power supply requirement||13.8V DC ±15%|
|Power Consumption||Tx: 21A (at 100W output power)
Rx: 0.9A typical (Standby), 1.25A (Maximum audio)
|Operating temperature range||–10˚C to +60˚C; 14˚F to 140˚F|
|Frequency stability||Less than ±0.5ppm (–10˚C to +60˚C; 14˚F to 140˚F)|
(projections not included)
|Weight (approximately)||4.2kg; 9.26 lb|
|Output power (HF/50MHz)||SSB/CW/FM/RTTY: 2–100W, AM: 1–25W|
Digital P.S.N. modulation
Digital Low power modulation
Digital Reactance modulation
|Spurious emission||Less than –50dB (HF bands), Less than –63dB (50MHz band)|
|Carrier suppression||More than 50dB|
|Unwanted sideband||More than 50dB|
|Receiver system||Direct Sampling Superheterodyne|
SSB/CW (at 10dB S/N)
AM (at 10dB S/N)
FM (at 12dB SINAD)
* HF: Preamp 1 ON, 50MHz: Preamp 2 ON
|Squelch sensitivity* (Threshold)
SSB: Less than 5.6μV, FM:
Less than 0.3μV
* HF: Preamp 1 ON, 50MHz: Preamp 2 ON
|Selectivity (sharp filter shape)
SSB (BW: 2.4KHz)
CW (BW: 500Hz)
RTTY (BW: 500Hz)
AM (BW: 6kHz)
FM (BW: 15kHz)
More than 2.4kHz/–6dB
Less than 3.4kHz/–40dB
More than 500Hz/–6dB
Less than 700Hz/–40dB
More than 500Hz/–6dB
Less than 800Hz/–40dB
More than 6.0kHz/–6dB
Less than 10kHz/–40dB
More than 12.0kHz/–6dB
Less than 22kHz/–40dB
|Spurious and image rejection ratio||HF: More than 70dB
50MHz: More than 70dB (Except for ADC Aliasing)
|Audio output power||More than 2.5W (at 10% distortion with an 8Ω load, 1kHz)|
|Frequency range||1.9–50MHz bands|
|Matching impedance range||16.7Ω–150Ω unbalanced (VSWR better than 1: 3)|
|Tuning accuracy||VSWR 1: 1.5 or less|
|Tuning time||2–3 seconds (Maximum 15 seconds)|
All stated specifications are subject to change without notice or obligation.
Rear panel view
1KW linear amp
Automatic tuning antenna
NVIS kit to use with
Control cable for AH-4
Photo coming soon.
Cable adapter converts
13-pin to 7/8-pin connectors
Control cable for AH-740
Mobile mounting bracket
IP remote control software
USB remote encoder
Untuk mendapatkan penawaran harga silahkan hubungi sales kami di:
|Telp||: (021) 4211456 - 4211477|
|WA||: 0812 8191 7839|
|WA||: 0811 1477 192|
|WA||: 0811 1477 195|
|WA||: 0811 1477 194|