IC-G88 Perbesar

Icom IC-G88

Icom
IC-G88

Baru

Produk terbaru dari Icom IC-G88 dengan standar militer, power 5,5 Watt battery tahan sampai 20 Jam dan Waterproof IP67

Detail

Info Harga:
(021) 4211477
081281917839

Informasi selengkapnya

Fitur Icom IC-G88

  • Easy field programming with VFO mode operation
  • Up to 16 Favorite channels can be assigned to the rotary knob
  • IP67 waterproof and dust-tight protection
  • 5.5 W of output power
  • Up to 20 hours of operating time with the supplied waterproof battery
  • Eight character alphanumeric display
  • CTCSS and DTCS encoder/decoder with Pocket beep
  • Eight DTMF autodial memories
  • MDC 1200 PTT ID and BIIS 1200 PTT ID
  • Inversion voice scrambler (16 code) for private conversations
  • Channel announcement of the operating channel number
  • Seven programmable buttons with Shift key function
  • Priority, memory and VFO scan
  • Hands-free operation with an optional headset

Spesifikasi Icom IC-G88

General

 

IC-G88

Frequency coverage
136MHz–174MHz
Type of emissions
16K0F3E, 11K0F3E (25/12.5 kHz)
Number of channels
128 channels
Antenna impedance
50 Ω (BNC)
Power supply requirement
7.5 V DC
Operating temperature range
–30 ˚C to +60 ˚C (Radio only)
Frequency stability
±2.5 ppm
Current drain (Approximate)Tx High
1.5 A
Rx Max. audio/Stand-by
500 mA (Internal SP) / 77 mA
Dimensions (W×H×D)
(Projections not included)
52.2 × 111.8 × 30.3 mm (with BP-280)
Weight Approximate)
270 g (with BP-280)

Transmitter

 

IC-G88

Output power (at 7.5 V DC)
5.5/2.0/1.0W
(Hi/L2/L1)
Max. frequency deviation
±5.0kHz/±2.5kHz (Wide/Narrow)
Spurious emissions
70 dB minimum
External microphone connector
3-conductor 2.5(d)mm (1/10″)/2.2kΩ

Receiver

 

IC-G88

Sensitivity
0.25 µV typical (at 12 dB SINAD)
Squelch sensitivity
0.25 µV typical (at threshold)
Adjacent channel selectivity
76 dB/ 53 dB typical (W/N)
Intermodulation
74 dB typical
Spurious response
70 dB minimum
Audio output powerInternal SP
1500 mW typ. (8Ω load)
External SP
400 mW typ. (8Ω load)
External speaker connector
3-conductor 3.5(d)mm (1/8″)/8Ω

Measurements made in accordance with EIA/TIA-603.

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard
MIL-810 G
Method
Proc.
Low Pressure
500.5
I, II
High Temperature
501.5
I, II
Low Temperature
502.5
I, II
Temperature Shock
503.5
I-C
Solar Radiation
505.5
I
Rain Blowing/Drip
506.5
I, III
Humidity
507.5
II
Salt Fog
509.5
Dust Blowing
510.5
I
Immersion
512.5
I
Vibration
514.6
I
Shock
516.6
I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards
Dust & Water
IP67 (Dust-tight and waterproof protection)


All stated specifications are subject to change without notice or obligation.

Comments ()

30 other products in the same category: