IC-F6123D Perbesar

Icom IC-F5123D/ICF6123D

Icom
IC-F5123D/ICF6123D

Baru

The Icom IC-F5213D/F6213D is Everything you'd expect in a business radio Plus Digital!

Detail

Rp. 3.750.000

Informasi selengkapnya

Everything you'd expect in a business radio
... Plus Digital!

128 channels with 8 zones

Ample 128 channel capacity allows most companies plenty of room to grow. Up to 8 zones lets you group together channels in logical fashion.

Built military rugged!

The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL standard 810 F.

Compact hand microphone

Select from 5 levels of mic gain, for clearer transmission.

GPS receiver connection

With optional D-SUB 25-pin ACC cable OPC-2078, an external GPS receiver or PC can be connected. 

Note:No Digital Modulation "IN" using accessory cables.

8-character LCD

An 8-character alphanumeric LCD with user-friendly icons shows a variety of information and operating status such as caller's name, received message, etc.

Large programmable buttons

For easy access to often used functions, P0-P3 buttons are programmable to meet specific needs. Buttons and LCD display are backlit for night time opeartion.

Powerful, front-facing speaker

4 watts (typ.) front facing speaker delivers clear and loud audio throughout a vehicle's cabin. Digital modulation adds distinct clarity to received voices.

IDAS™ digital mode operation

The IC-F5123D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with IDAS multi-site conventional and IDAS single-site trunking. The following IDAS features are programmable.

  • PTT ID
  • Individual/Talkgroup list (Max. 500)
  • RAN (Radio Access Number)
  • Status
  • SDM (Short Data Message)
  • Call alert
  • Radio check (RX)
  • Stun/kill/revive (RX)
  • Remote monitor (RX)
  • Emergency (No ACK)
  • Digital voice scrambler
  • GPS data (PC and software required to show received position data)

Built-in 2-Tone and 5-Tone (Analog mode)

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The stun/kill functions disable a radio over the air and the revive function restores the stunned radio.

MDC 1200 compatible (Analog mode)

The following MDC features are available with the built-in MDC signaling.

  • PTT ID
  • Radio check (RX)
  • Emergency (No ACK)
  • Stun/Revive (RX)
  • 500 alias table (Max.)

Scan features

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.

Lone worker function

When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.

Optional Active Noise Canceling Microphone

The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.

Watch the HM-211 performance video:

Other features

  • CTCSS/DTCS encoder/decoder*
  • BIIS PTT ID transmission*
  • 8 DTMF autodial memories
  • Microphone hanger action programmable
  • Optional DTMF microphone (HM-152T)
  • PC programmable
  • Power-on password function
  • Time out timer
  • Talk around function
  • Nuisance delete function*
  • Forced narrow function*

General

 

IC-F5123D

IC-F6123D

Frequency coverage
136-174MHz
350-400MHz
400-470MHz
450-512MHz
Number of channels
128 channels (8 zones)
Channel spacing
6.25/12.5/25kHz
Type of emission
16K0F3E, 8K50F3E, 4K00F1E/F1D
Current drain
(approx.)
Tx50W/45W
10A
11A
25W
5A
RxStand-by
300mA
Max. audio
1.2A
Dimensions
(projections not included;
W×H×D)
50W/45W version
150×40×167.5 mm;
5.91×1.57×6.59 in
25W version
150×40×117.5 mm;
5.91×1.57×4.63 in
Weight50W/45W version
1.1kg; 2.4lb
25W version
0.8kg; 1.8lb

Transmitter

 

IC-F5123D

IC-F6123D

RF output power50W/45W version
50W, 25W, 5W
(Hi, L2, L1)
45W, 25W, 5W
(Hi, L2, L1)
25W version
25W, 10W, 2.5W
(Hi, L2, L1)
25W, 10W, 2.5W
(Hi, L2, L1)
Spurious emissions
70dB (min.)
Frequency stability
±1.0ppm
Audio harmonic distortion
3% typical
40% deviation
FM Hum and Noise
46/40dB typ. (Wide/Narrow)

Receiver

 

IC-F5123D

IC-F6123D

Sensitivity
0.25μV typ. (at 12dB SINAD)
0.18μV typ. (at 5% BER)
Adjacent channel selectivity
80/70dB typ. (W/N),
65dB typ. (digital)
75/65dB typ. (W/N),
60dB typ. (digital)
Spurious response rejection
70dB min.
Intermodulation rejection
75dB typ. (W/N),
70dBμV emf type. (digital)
AF output power
(at 5% distortion with an 4Ω load)
4W (typ.)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

StandardMIL-810 F
Method, Proc.
Low Pressure Storage
500.4 I
Low Pressure Operation
500.4 II
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Humidity Induced
507.4
Settling Dust
510.4 III
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV


Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.

Comments ()

30 other products in the same category: