IC-F4161DT Perbesar

Icom IC-F4161DT

Icom
IC-F4161DT

Baru

ICOM IC-F4161DT  IDAS (Icom Digital Advanced System) is Icom's digital conventional and trunking system based on the NXDN™ common air interface.

Detail

Rp. 8.025.000

Informasi selengkapnya

CONVENTIONAL / IDAS™DIGITAL / IDAS™ TRUNKING / LTR™ - MULTI-MODE LAND MOBILE!

IDAS™ digital mode ready

IDAS

The IDAS (Icom Digital Advanced System) is Icom's digital conventional and trunking system based on the NXDN™ common air interface.
It has useful calling features including selective calling, status message, radio stun/kill/revive, etc.

IP55 dust-protection and water jet resistance

The IC-F3161D series meets IP55 requirements for dust-protection and water jet resistance. Its durable construction is backed up by the aluminum die-cast chassis and polycarbonate casing, allowing reliable operation under harsh weather and environmental conditions.

Lithium-Ion battery pack

The supplied 2000mAh (typ.) Li-Ion battery pack, BP-232FM, provides 14 hours* of operating time.
* Typical operation Tx:Rx:Stand-by=5:5:90, power save on

Most popular signalings built-in

The 2-Tone, 5-Tone, CTCSS, DTCS and MDC signaling capabilities are built-in for group communication or selective calling. The radio can decode ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received, the following actions are programmable for each code.

  • Beep sound
  • Bell icon
  • Answer back call
  • Auto TX
  • Radio stun/kill/revive
  • Scan

Basic LTR™/conventional mode operation

Both LTR™ trunking and conventional channels are programmable on a radio. Group, selective (DTMF), and phone call are available in LTR™ mode.

MDC 1200 Compatible

The following selective calling and ANI features are available with the built-in MDC signaling.

  • PTT ID
  • SelCall
  • Radio check
  • Radio stun/revive
  • 500 Aliases
  • Status message/request
  • Call alert
  • Emergency, emergency mic monitoring

Voting mode scanning

The voting mode scanning detects the signal strength level of repeater stations and automatically selects the strongest station, useful for roaming between 2 or more repeater sites. Once you program the voting mode to a memory zone, you can easily start voting mode operation by changing the zone setting.

Full dot-matrix LCD

ic-f3161fm image Using a large full dot-matrix LCD (32 × 18 mm), the IC-F3161D series shows upper and lower case characters clearly. The display setting is selectable from 1 line, 12 characters or 2 lines 24 characters via programming. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Enhanced audio

The IC-F3161D series employs a BTL amplifier that increases the audio output and the built-in audio compander provides clear, low noise communications.

Lone worker function

When the radio is not operated for a preset period, a beep sounds and a button push is required. If no button is pushed within that preset time, an emergency signal automatically transmits and alerts your co-worker or dispatcher to any potential trouble.

Intrinsically safe

FM APPROVED

The Intrinsically safe version is approved by the FM Approvals. It is suitable for use in hazardous areas where flammable gasses or liquids are used.

IS: Class I, II, III/ Div 1/ Groupes DEFG/ T3C Ta = 40°C
NI: Class I/ Div 2/ Groupes ABCD/ T3C Ta = 40°C

Special condition for use Must be used with the BP-232FM battery. The HM-169IS, VS-1SC, HS-94, HS-95 and HS-97 are approved as intrinsically safe options. Any other options, except the antenna, belt clip and belt hanger, cannot be used in explosive atmosphere areas.

Never charge the BP-232FM (with/without the transceiver) in an explosive atmosphere. The optional battery chargers are not approved as intrinsically safe.

Other features

  • 512 memory channel with 128 zones
  • 8 DTMF autodial memories
  • Built-in inversion type voice scrambler
  • 2 step reduced power setting
  • Busy, repeater lockout functions
  • Escalating alarm
  • Mode dependent scan
  • Surveillance function temporarily turns off the LED backlight and beep sound
  • Powerful 5W output both in VHF and UHF
  • Flash CPU for future upgrade and more...

 

  • IDAS and IDAS logo are trademarks of Icom Incorporated.
  • NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation.
  • LTR is a trademark of E.F. Johnson Technologies Inc.
  • All other trademarks are the properties of their respective holders.

 

Specifications

General

 

IC-F3161DT/DS

IC-F4161DT/DS

Frequency coverage
(Varies according to version)
136–174 MHz
400-470 MHz
450-512 MHz (USA)
450-520 MHz (GEN)
Number of channels
512 ch/128 zones
Channel spacing
(Varies according to version)
12.5/25, 15/30
6.25 kHz
12.5/25
6.25 kHz
Type of emission
16K0F3E, 11K0F3E, 11K0F7E/D, 8K50F3E, 8K10F1E/D, 4K00F1E/D
Current drainTx High
1.5A
1.8A
RxStand-by
150mA
140mA
Max. audio
600mA
Dimensions
(projections not included; W×H×D)
53×136×38.9 mm
2.09×5.35×1.52 in
(with BP-232FM)
Weight (approx.)
340g; 12.0oz (with BP-232FM)

TRANSMITTER

 

IC-F3161DT/DS

IC-F4161DT/DS

RF output power
5W
Spurious emissions
75dB (typ.)
Frequency stability
±1.0ppm
Audio harmonic distortion
3% typical
40% deviation
FM Hum and Noise
46dB typ. (W)
40dB typ. (N)
Digital FSK error 5% max.

RECEIVER

 

IC-F3161DT/DS

IC-F4161DT/DS

Sensitivity at 12dB SINAD
0.25μV (typ.)
Adjacent channel selectivity (W/N)
75/68dB (typ.)
Spurious response rejection
70dB (min.)
Intermodulation rejection
74dB (typ.)
AF output power
(at 5% distortion with an 8Ω load)
500mW (typ.)

FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS

 

IC-F3161DT/DS IC-F4161DT/DS

Number of option slots
-
CTCSS/ DTCSencoder
Available
decoder
Available
2-Toneencoder
Available
decoder
Available
5-Toneencoder
Available
decoder
Available
DTMF autodial
Available
DTMF decoder
Available
Voice ScramblerInversion
Available
Non-rolling
-
Rolling
-
APCO P25 digital
-
AES encryption
-
DES encryption
-
FIPS 140-2 Level 1
-
IDAS digital
Available (UT-126FM installed)
MPT 1327
-
MDC 1200
Available
LTR™ trunking
Available
PassPort
-
Man Down function
-
Intrinsically safe
-
Vibration alert
-
Voice recorder
-

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

StandardMIL-810 F
Method, Proc.
Low Pressure Storage
500.4 I
Low Pressure Operation
500.4 II
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Rain Blowing
506.4 I
Rain Drip
506.4 III
Humidity Induced
507.4
Salt Fog
509.4
Dust Blowing
510.4 I
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV
Also meets equivalent MIL-STD-810 -C, -D and -E.

Ingress Protection Standards
Dust & Water
IP55 (Dust-protection and water jet resistance)

All stated specifications are subject to change without notice or obligation.

Comments ()

30 other products in the same category: